Features & Customization Options
Our dynamic Fibre Core design consists of 2 skins of fiberglass (⅛" thick) vacuum sealed to a honeycomb core. Each interlocking section is first bonded and then secured with special fasteners creating a solid uni-body construction. For added strength and durability, a piece of steel is embedded into the fiberglass wherever a hinge, latch, or hardware is to be mounted. A vinyl trim piece is then attached with a self-adhesive bonding strip to cover the seam. The floor is fastened onto the frame and is easily detached if necessary. This lightweight construction will not ding, dent, or rust!
Standard Features
Non-Skid All Fiberglass Floor
A 1/2" polyethylene honeycomb core provides for a strong, lightweight constructed, one piece floor with molded wheel wells for protection against leakage. Easy to clean up and can be hosed out with ease. Floor drain in each corner. Tandem Axles, 4 Stabilizing Jacks, Swivel Jack, 2" Ball Coupler
One Piece Fiberglass Roof and Ceiling
Insulated with "Fibre Core" construction, the roof has molded, LED Interior Light. 12 volt System for clearance lights, break lights and turn signals.
Fiberglass Serving Awnings on 3, 2, or 1 Sides
Light weight and supported by hydraulic air lifters with built-in stops.
Fiberglass Interior Counters
On three sides 22" wide counters made out of the same "Fibre Core" construction for strength, durability and lasting good appearance with molded fiberglass legs.
Fiberglass Overhead Shelves
On all four sides 8" shelves above each serving counter to keep supplies handy, yet up and out of the way
Entry Door with Dead Bolt Lock
110v/30 amp Service Entrance - Two 110v Outlets
Can upgrade to 220v/50 amp
Options
Water System-(1 S.S. Hand Sink,3 Comp S.S.
Sink,26 gal Fresh Water Tank,40 gal Waste
Tank,6 gal Electric Water Heater,
Demand Pump, Water Hatch)
Spare Tire and Rim
Screen Enclosure-Interchangable
Tempered Glass Window Enclosure
Sliding Window/Screen Entry Door
Fiberglass Fender Skirts
Fiberglass Undercounter Doors
20” Illuminated Header (PT714 only)
20” Header Sign (PT 710 & 714 models)
Under Counter Cash Drawer
Lighted Awnings
Fold-out Stainless Steel Counters
Extra 110 Outlets
220v 50 amp Service Upgrade
13,000 BTU Air Conditioner
Roof Vent
Two 30" Propane Tanks w/Cover
Custom Cut-Outs for Installations
Exhaust Hoods
Drop In Insulated Fiberglass Ice Chest
Adjustable Cup Dispenser
Vinyl Bottom Trim Skirting
Header Sign
Food Equipment
48" Exhaust Hood
Graphics
Water System
AND MUCH MUCH MORE. . .